Let There Be Light…

If you’re building a small slice of Victorian London, there are two things that you really need to have to make it have that ‘Victorian’ feel – cobblestones and gaslights. So, as my last post dealt with the cobbles, this post will deal with gas lamps.

Now, those who regularly trawl the Internet will know that a search engine is only as good as the parameters entered.  So, should you enter “28mm Victorian lamppost” or “model railway Victorian lamppost” you will discover that those gas lamps made specifically for wargaming can be a little on the pricey side and the majority of model train lighting is similarly expensive, as they are designed to actually light up. Based on this, you would conclude that it would probably be within your hobby skills to make your own for the fraction of the price.

However, if you’d remembered that 28mm is approximately O Scale/Gauge and put in “O Gauge Victorian Lampposts”, you would have found you could actually get a pack of 10 Victorian gas lamps (with integral lighting) 73mm tall, for just under £7.00 including shipping. The key word in that previous sentence is the word “if”…

Annoyingly, I only found the cheap model gas lamps AFTER I’d built my own. I could claim that showing you how will save you money in the long run (these actually cost me nothing but time, as I already had all the components) or that the same principles could be used to make street signs or lamp posts for other eras (which it obviously can), but the real reason I’m showing you this is because I spent several hours slaving over the ruddy things, so the least you can do is read the bloody post.

*ahem*

Right, first you need a few components, as shown below:


What we have are some cup washers, some dressmakers pins, some cotton buds (or Q-tips), some small nails(which didn’t get used) and the most important component, some ink cartridges for pens. You can get a pack of thirty of these for £1.99 here in the UK, and these can be used as shell casings for howitzers, jet engines for space craft, missiles, gas canisters, etc. so quite a useful little item.

So, the first thing we do is prepare some bases to attach our components to, which consists of some 2 pence pieces (or 25mm washers) to which I glued some textured wallpaper, the same that I used for the pavements on my cobbles boards:

These would also make pretty good bases for dungeon-crawl figures, be they monsters or adventurers.

Next, we need to prepare the ink cartridges, as we’re only going to be using part of them, so we need to cut them up without getting ink everywhere. The easiest way to do this is to actually just cut them on a wad of kitchen towel and let that soak up the ink. For our lamp posts we need the top 20mm of the cartridge, with the tapered end. Once you’ve cut you cartridge down to size, rinse both parts out with clean water and use one of your cotton buds to dry out the inside.

The cotton buds need to be stripped of their cotton before they can be used, but once they are, using a bradawl or similar pointy object, break the seal at the top of the ink cartridge and push one end of your stripped cotton bud into it. Then glue it onto the cup washer.

You will now have a post 90mm tall. Using your judgement and/or eye, push a pin through the post at the correct height to make the cross-bar typical for Victorian gas lamps. As the whole length of the pin will be far to long, snip of the pointy end at a length that is pleasing to the eye (mine are about 20mm long). You will then end up with something that looks like this:

And yes, one of them is a bit wonky. Next I decided to paint each one of my six lamp posts with GW chainmail, as I know metallic paints do tend to give a much better coverage than non-metallics, so they looked like this:

Now, I apologise that there aren’t that many WIP shots during the next part, as how I had intended on making the gas mantles for the tops of my lamp posts didn’t quite go according to plan, so I had to come up with an alternative, which I actually think worked out better, but I’ll leave that for you to judge for yourselves.

I had intended on carving rhomboid gas mantles, the standard shape for Victorian lamps, from a partially transparent pencil eraser, then pushing these onto the tops of my posts. However, cutting six rhomboid gas mantles that have exactly the same dimensions AND straight sides is not as easy as I thought it would be – in fact, it was an absolute nightmare, so back to the drawing board I went.

After giving it some thought and rummaging through various different boxes of bits, I came up with what I hope would be an elegant solution.

First, I shortened the off-cuts from the ink cartridges to approximately 15mm in length and made a small hole in the base (now top) of each one. Taking another dressmaking pin and half a small popper/snap fastener, I fed the pin through the popper with the ‘knob’ upwards, then through the hole in the top of my off-cut. I now had a transparent mantle with knobbly decorative top and a pin shaft that could be fed into the hollow stem of the cotton bud, meaning that it could be glue in place without the superglue further frosting the ‘glass’.

My lamp posts were then painted matt black, followed by black ink to give them that shiny black paint look common to Victorian ironwork, except for the top 15mm, which was painted with a bright gold, to represent the lit gas lamp. The mantles were then glued on top, and the top of each mantle received its Chainmail base coat, matt black mid coat and black ink final coat. The end result was this:

So, they may not be exactly 100% accurate, but I think they look pretty damned good and they cost me nothing! 

And as you’re probably wondering exactly how big they are compared to a standard 28mm figure, here’s everyone’s favourite grumpy Victorian monster hunter, Lancelot Grimm himself, taking an evening stroll:

Of course, we can’t really finish off the post without showing what the lamp posts look like on my cobblestone boards, now can we?

Look pretty good from GEV (Gamer’s Eye View), but here’s a closer shot;

And there’s the wonky lamp-post again…apparently this was damaged when an orangutan dressed for the opera used it to escape the peelers, after he’d brutally cut up a dolly mop with a straight razor. Can’t trust those damned dirty apes…

So, yes, you can buy inexpensive scale Victorian gas lamps which work out at roughly 70p each, but you will have to gut the electrics and they are about 25mm shorter than the ones I’ve built. Or, if you’ve got the mind to do it, you could have a go at making your own, as I did. They may not be exactly right, but as you can see from the pictures above, once in place, they do add to the overall Victorian ambience, which is what I’m trying to achieve.

Next time, more ‘Gothic Victoriana’, as I complete my quartet of tiles with the Chapel of St. Gilbert and it’s attendant graveyard. It’s “Gothic” Victoriana…gotta have a graveyard…

 

 

Advertisements

24 thoughts on “Let There Be Light…

  1. fantastic posting, Jez, absolutely terrific – one of my faves tbh. Those lamp-posts look spot-on, and when placed upon your excellent cobblestone streets look even more the business. This gaslight series is really shaping up to be your best yet, and toppling your Sci-Fi ships/Ghostbusters series is a seriously mean feat!! 🙂

    Like

    • Thank you very much, Simon. High praise indeed, and we’re only three posts in! As the project progresses, we should see my small corner of London become more detailed.

      However, once the fourth tile is built and I have some ‘shells’ to represent buildings, there will be the first game played, as I’m itching to get the coppers on the board fighting something ‘orrible in the fog.

      Like

    • Thanks Andy. They did come out rather better than I expected, especially as the end result wasn’t quite what I intended to start with. However, once in place, they don’t look too shabby,

      Like

    • Thank you very much, Michael. As they were relatively simple to build and I still have plenty of components left, if I need any more (to decorate the front of ‘The Red Lion’ for example) I can knock them up pretty quickly.

      Like

  2. Brilliant work Jez, great use of common items to achieve the perfect effect. I f you’d bought the 0 gauge ones, you wouldn’t have had as much satisfaction as the ones you’ve created

    Like

    • Thanks Dave. I do have a tendency for using readily available odds and ends and combining them in ways that aren’t immediately obvious, and try and encourage others to do the same. That way you can spend money on the stuff you can’t make yourself.

      Like

    • Thanks Roy. Part of the reason I do this is to show how simple it is to get good results using cheap components and a bit of ingenuity. If it inspires just one person to give it a go and thus save themselves a bit of cash, that’s a win in my book. 😁

      Like

    • Thanks Roger. I had noted rhat we hadn’t seen a post from you recently. Real life does have a tendency to impinge on hobby time and can lead to a lack of motivation when actually given some ‘free time’. Hope you regain your mojo soon.

      Like

    • Thank you very much, Dave. As my hobby funds are not great, I do try and come up with cheaper alternatives to buying everything I ‘need’. And you certainly can’t argue with price on this particular project.

      Like

  3. I concur. This is very well done, from the groundwork up. I would be more than happy to field those streets on the table top myself, and those lampposts are pure ingenious.

    Like

    • Thanks Steve. I’m pleased you like them. I think it just goes to show that if you have a definite plan in place before you start (including various sketches) and follow it in a logical fashion, it does come together (relatively) painlessly. And the lamp post are surprisingly robust.

      Can’t wait to crack on with the final tile, so I can actually start playing…because I I don’t, I’m sure I’ll get nagged…lol

      Like

  4. most enlightening and very encouraging. For it shows there are alternative ways of doing most anything, if you set your mind to it. I`d also be interested to see the official lamps as well as the home made ones. Personally, I`d like to see the streets used as a base (foundation) for our existing urban terrain buildings, although I would in fact be more than fine just imagining the buildings and playing flat the streets as they are, on 2D board. The `image` is there, which is the important thing, and 2D or 3D, I`m not fussy.

    Nicely done Jez.

    Like

    • Thanks Hils. I will include some images of the cheap lamp posts I found in my next post – I didn’t include it in this one because it was already rather lengthy and I was a bit annoyed about it.

      We are getting v-e-r-y close to the first AAR. I just need to construct my final tile, which will be the churchyard and Chapel of St, Gilbert. The church is already constructed, I have the fencing and a tomb for the grounds, just need to put it all together. So probably one more ‘build’ post, then the first outing of the Black Museum forces versus…well, that’d be telling…😉

      Like

  5. Pingback: For Whom the Bell Tolls | Carrion Crow's Buffet

  6. Pingback: A Touch of Brass | Carrion Crow's Buffet

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s