A Visit to the Workshop

As previously mentioned, I will be attending Salute again this year, but will be doing so on the other side of the fence, as I will be assisting Dave Stone of Wargames Terrain Workshop on his stand. So, I felt that I really should meet Dave in the flesh prior to April and therefore arranged to visit him in Gloucester last weekend.

Dave was a very welcoming host, plied me with copious amounts of coffee and treated me to a very interesting insight into the creative process behind the models he creates for WTW. We also managed to get a game of Death Match in, in which my Revilli Gladiator managed to slay her Ceratid opponent, TWO of the released beasts, then got pounded into the dirt by a Horned Hominid. If you haven’t had a chance to play this game yet at a show, make sure you visit the stand at Salute, where we will be running demonstration games for most of the day.

When I left, I was presented with a few items to take away with me. Some I was expecting, as these were prizes from the Death Match competitions run on The Game Cupboard last year, but Dave had very kindly added some extra items – namely a few bits that I’d enthused about when he’d shown them off on TGC.

Now, as a beneficiary of Dave’s generosity, I thought I’d take the opportunity to show some of the items Wargames Terrain Workshop does or will be releasing in the future, but with a standard 28mm miniature in the pictures, to give you some idea of scale. As the majority of the time, we gamers buy online, its always good to know exactly how big some of these models actually are…

First up, one of my competition prizes, the Creminisci;

This aquatic race was designed by Tarot Hunt for the Death Match universe, and are a race of fish-like mystics, who can harness their mental power to produce a variety of effects. As the DM range is nominally 32mm scale for standard humanoid races, you can see that the Creminisci are roughly the same scale as a DM Human, but are larger than the 28mm figure in the picture.

I asked for mine to be cast in translucent blue resin – because I’m an awkward bugger – but I believe the general release figures will be in opaque grey resin.

Next up, my winning contribution to the Death Match universe, the Nisari;

The Nisari are a sect that believes that ‘The Games’ are an abomination and have dosed their most fanatical warriors with a potion that increases their effectiveness as warriors, but also burns them up from the inside, hence the bloodstained bandages.

As you can see from the picture, the Nisari tower over a normal 28mm figure and are still pretty big in comparison to a standard DM human. But they are supposed to be, as they are Traventians, who are bigger than the humans in the game. The two figures shown are the Nisari male and the Nisari Priestess, currently milking a Dust Viper for its venom. The Nisari female comes with separate arms and as I’ve not attached these yet, I decided not to show her.

Now, as you may not be a Death Match player, you might be thinking why would I buy these models? The Creminisci would quite easily fit into any fantasy or sci-fi game of your choice. As for the Nisari…could you imagine Conan facing this in the wastes of Stygia? Or your Pulp Alley league being menaced by this because they opened the wrong tomb? Or maybe your Tomb Kings army needs a giant freaking insane mummy, because…well, who doesn’t?

Now, these aren’t on general release yet, but I’m sure Dave will let everyone know when they will be available.

Next up, the Venucian Man Eating Plant, which has been released;

The figure in the picture is one of my Victorian thugs from Ironclad Miniatures, which gives a good indication of the size of this terrain piece. Three open ‘traps’ and one currently digesting an unfortunate victim. If you play Congo, Pulp Alley or, to be frank, ANY game that ventures into the jungle, be it terrestrial or off-world, get this piece. It’s well-detailed, versatile and only £6.00.

Next, a model that came about from a conversation I had with Dave about monstrous pigs…the Grice;

I had mentioned in my ongoing Tales of the Black Museum a previous case featuring the ‘Black Pig of Awdry Gardens’. Now, I quite fancied having a model to represent this, and mentioned to Dave that I had not yet found something suitable. He queried what sort of beast I was after and after much to-ing and fro-ing, he’d got a good idea of what I was after. Thus was born the Grice. The name is actually that of an extinct Iron Age pig that was common in Scotland, but as this beast was supposed to represent a monstrous swine, either demonic or primeval, artistic licence was employed. The Grice is now an official part of the Death Match universe, but can be used wherever you need a bloody great porker. Available now for a very reasonable £7.00.

Next up, the Digestion Pool;

Designed for the Exuvium race in Death Match, which they use to break down the bodies of the animals they catch into a delicious and nutritious soup, this terrain piece has so many other uses. It’s reminiscent of the architecture in the Alien movies, but what the fluid bubbling away in it is, is entirely up to you and your paints to decide. As you can see from the picture, this is currently being scanned by one of my Ghostbusters, so it may contain psycho-reactive ectoplasm of ‘mood slime’. A nice solid bit of terrain for £5.00.

Finally, a lovely surprise for me – the Falcon Interceptor. Now, this is actually a “off-cast” (not sure if that’s the correct term). Basically, this was a model that Dave couldn’t sell, as it was mis-cast. You can’t see it from the picture, but there are a few cavities on the underside that will require filling. I’d commented that it would make an ideal alternative mode of transport for my Vin Diesel inspired Ghostbuster, especially with the tanks at the rear, but would need a light bar for the roof. Dave was already in the process of creating one of these for a new futuristic car, so Vin-Buster is now the proud owner of his very own Ecto-V8;

“It’s got, like, a cup-holder and…everything.”

He looks pretty pleased with it and it’s going to look awesome once painted in the appropriate livery.

Hopefully this post has given you an idea of how these particular items scale up against standard 28mm figures and maybe added a few items to your online or Salute shopping list.

Next time, we will definitely be back in Blackwell…

Advertisements

18 thoughts on “A Visit to the Workshop

  1. Great post Jez, really like how you’ve shown all the pieces next to a 28 mm model, and suggestions on other gaming systems they would work in

    Like

    • Thanks Dave. As hobby time has been limited this week, I thought a showcase of my haul would be a good filler. And as you can never be quite sure of the scale of items, even if the vendor provides measurements, I always try to provide comparison shots. It makes it easier for others to judge whether the item is suorable for their collection.

      As for suggesting other systems, sometimes people feel they can only use a model for the particular system it was designed for and this is a habit that I’m encouraging people to break.

      Like

    • Thanks Keith. When I saw the Digestion Pool, I could immediately see additional posdibilities for it beyond it’s original purpose. A pool of bubbling blood in an Aztec vampire’s temple, a acid-filled birthing pool for xenomorphs and, as you say, the Lazarus Pit.

      As Dave and I discussed at the weekend, once you own a model or piece of terrain, it’s yours to do with as you wish. There is no Hobby Police to tell you you’re doing it wrong.

      Like

    • Thanks Andy. Whilst I was expecting to collect my ‘prizes’, I wasn’t expecting the other items. So it seemed right to showcase them, to thank Dave for his generosity and maybe give a bit more exposure to his range.

      Like

    • Thanks Roy. It’s a pretty substantial piece and very well-detailed. Whilst writing the post, I was thinking it would be an ideal encounter for a Star Trek away team, so you can feed some of your redshirts to it. 😉

      Like

  2. Wonderful posting, Jez, lots to see and admire. The Venus fly-trap particularly caught my attention as its looks truly formidable at the size Dave has sculpted it. Marvellous!! Well done on giving Dave a darn good thrashing at his own game too 🙂

    Like

    • Thanks Simon. It was an interesting visit, as I got see how the models progress from initial green to finished model. And u til you see the items in the ‘flesh’, you don’t really appreciate their size, which is why I’ve tried to give an indication of this in my post.

      And the dice favoured me – Dave said he’s not rolled that many skulls in one game since he started playing!

      Like

    • Dave does a lot of nice items, which are very reasonably priced compared to other manufacturers.

      And I seem to recall you were doing a post-apocalyptic project in your previous posts, so the Falcon would fit right in.

      Like

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

This site uses Akismet to reduce spam. Learn how your comment data is processed.